Skip to Content
(WX842L) NITRO 20V CORDLESS 18GA BRAD NAIL GUNMy tool will not start
(WX842L) NITRO 20V CORDLESS 18GA BRAD NAIL GUN

(WX842L) NITRO 20V CORDLESS 18GA BRAD NAIL GUN

My tool will not start

Try this solution

Ensure the battery is fully charged and properly installed.

  1. Make sure the battery is fully seated in the charger. If no light shows, check if the outlet is working. If the charger still shows no light, it may need to be replaced.

  2. Once the battery is fully charged, insert it into the tool.

  3. Select your nailing mode and make sure that the selector is properly seated. This is important to prevent unexpected nail discharge and possible injury.

  4. Push the Workpiece Contact against the work surface first, then squeeze the On/Off Trigger to start.

Remember, safety should always be your priority.

Need more help?

Ask a different question(WX842L) NITRO 20V CORDLESS 18GA BRAD NAIL GUN
Select a different product
On this page