(WG162) 20V POWER SHARE 12" CORDLESS STRING TRIMMER & EDGER
Excessive vibrations/noise
Try this solution
Rewind the spool lines or switch it out for a new spool
Possible cause:
Line spool is not wound well.
Click on the guide to learn how to rewind the line.
How-to guide
1. Take approximately 10ft (3m) of line
Insert 5/8 inch (15mm) of line into the Spool holes.
2. Wind line in the direction of the arrows on the top of the Spool
Leave approximately 4 inches (100mm) of line unwound and place into the cleat.
3. Ensure that the line is neatly coiled on the Spool
Failure to do so will impair the efficiency of the automatic line feed.