Skip to Content
(WG284) 40V POWER SHARE CORDLESS 24" HEDGE TRIMMER (2X20V)My tool will not start
(WG284) 40V POWER SHARE CORDLESS 24" HEDGE TRIMMER (2X20V)

(WG284) 40V POWER SHARE CORDLESS 24" HEDGE TRIMMER (2X20V)

My tool will not start

Try this solution

Ensure that the batteries are fully charged

If no light shows on the charger, check if the outlet is working. If the charger still shows no light, the charger needs to be replaced.

Possible cause:
Batteries are low on power.

Once they are fully charged, properly place the batteries into the tool and push the FRONT SWITCH LEVER (1) then the REAR SWITCH LEVER (2) to start.

Need more help?

Ask a different question(WG284) 40V POWER SHARE CORDLESS 24" HEDGE TRIMMER (2X20V)
Select a different product
On this page