Skip to Content
(WX820L) 20V POWER SHARE SANDECK 5-IN-1 MULTI-SANDER
Cannot switch out the base
Try this solution
Push on the HYPERLOCK RELEASE BUTTON to release the lever
Once released, turn the lever counter-clockwise until the base you want to replace is release from the body.
Remove the base and replace it with the one you need. Ensure that the new base is properly positioned then turn the lever clockwise to secure it.
Once it is tightened, secure the lever back in place.
The FINGER and CONTOUR PLATE will need to be screwed onto the DETAIL PLATE to use.
On this page