Skip to Content
(WX852L) MULTI-FUNCTION PORTABLE CAR JUMP STARTER WITH USB CHARGING
Cannot jump car
Try this solution
Click on the guide to begin
1
Ensure there is enough power
The device need to display at least 3 LEDs when the POWER BUTTON (8) is depressed.
2
Turn ignition off before making vehicle connections
3
Connect the clamp set to the vehicle ignition port on the tool
Be sure that the cable connection is fully engaged and secure. Upon connection, the clamp will then light a flashing blue LED on the clamp box, indicating the unit is in standby mode.
4
Clamp the positive (red +) clamp to the positive terminal on the vehicle battery and clamp the negative (black –) clamp to the negative terminal
Once connected, the clamp light will turn solid green.
NOTE: You have 10 seconds to start the vehicle (counting from the moment the clamps are connected correctly into the Jump Starter) or the unit will return to standby mode (flashing blue LED).
5
Start the vehicle
When the vehicle is started, the smart cable/ clamp will show a solid blue LED and the warning buzzer will beep.
NOTE: If the vehicle doesn’t start within 6 seconds, let the jump starter cool for 3 minutes before attempting to start the vehicle again or you may damage the jump starter. During very cold conditions, the unit may not start on the first attempt. We suggest attempting to start a second or third time, as the starting attempt will warm the internal battery and improve your starting chances.
Do not attempt to start after four attempts – either the unit does not have sufficient power to start the vehicle or there is a more extensive problem with the vehicle than simply a depleted battery.
6
Disconnect the clamp from the vehicle
Disconnect the clamp from the jump starter.
On this page