Skip to Content
(WG124) 6 AMP ELECTRIC 15" STRING TRIMMER & EDGERExcessive vibrations/noise
(WG124) 6 AMP ELECTRIC 15" STRING TRIMMER & EDGER

(WG124) 6 AMP ELECTRIC 15" STRING TRIMMER & EDGER

Excessive vibrations/noise

Try this solution

Try rewinding the spool lines or switching it out for a new spool

Possible cause:
Line spool is not wound well.

Click the guide for how to rewind the line.

1

Take approximately 16ft (5m) of line and insert 5/8” (15mm) of line into one of the holes in the upper section of the SPOOL

2

Wind the line in the direction of the arrows on the top of the SPOOL

Repeat process with separate piece of line on lower section of SPOOL.

3

Leave approximately 4” (100mm) of line unwound and place it into the cleat

Repeat on the lower section of the SPOOL.

Note: Carefully ensure that the line is neatly coiled on the SPOOL. Failure to do so will impair the efficiency of the automatic line feed.

Need more help?

Ask a different question(WG124) 6 AMP ELECTRIC 15" STRING TRIMMER & EDGER
Select a different product
On this page