Skip to Content
(WX891L) NITRO 20V POWER SHARE 25 FT. CORDLESS DRAIN AUGERCable and obstruction are stuck in the pipe and cannot be retracted
(WX891L) NITRO 20V POWER SHARE 25 FT. CORDLESS DRAIN AUGER

(WX891L) NITRO 20V POWER SHARE 25 FT. CORDLESS DRAIN AUGER

Cable and obstruction are stuck in the pipe and cannot be retracted

Try this solution

Click on the guide to begin

1

Set the R position

In this position, the rotation of the cable will be reversed to counterclockwise. Push the ROTATION BUTTON (1), pull the FEED HANDLE (2) forward, and pull the VARIABLE SPEED TRIGGER (3).

2

Set FEED HANDLE to “Feed” (1)

Pull the FEED HANDLE back to feed. The indicator will display “F”.

3

Lightly squeeze the VARIABLE SPEED TRIGGER (2)

Note:
Backward position should only be used momentarily to relieve cable tension.

4

If that doesn’t work, pull out the cable by hand.

Remember to wear safety gloves and remove the battery from the tool and slowly pull the cable out of the pipe.

Need more help?

Ask a different question(WX891L) NITRO 20V POWER SHARE 25 FT. CORDLESS DRAIN AUGER
Select a different product
On this page