Skip to Content
(WX687L) 3.5 AMP SONICRAFTER CORDED OSCILLATING MULTI-TOOLCannot change the blade
(WX687L) 3.5 AMP SONICRAFTER CORDED OSCILLATING MULTI-TOOL

(WX687L) 3.5 AMP SONICRAFTER CORDED OSCILLATING MULTI-TOOL

Cannot change the blade

Try this solution

Use the ACCESSORY CLAMPING LEVER

To change your blade, first unplugged the tool from the power source. Then flip the ACCESSORY CLAMPING LEVER forward, parallel to the body of the tool.

Rotate the lever counter-clockwise until the flange releases the blade.

Switch the blade and turn the lever clockwise to secure the blade.

Need more help?

Ask a different question(WX687L) 3.5 AMP SONICRAFTER CORDED OSCILLATING MULTI-TOOL
Select a different product
On this page