Skip to Content
(WR235) LANDROID VISION 20V BOUNDARYLESS ROBOTIC LAWN MOWER (1 ACRE)
Mower does not Cut-to-Edge
Try this solution
Enable the Cut-to-Edge feature.
You can only enable the Cut-to-Edge feature through the mower's display at this time. For a detailed walkthrough, please refer to our Step-by-step Guide.
1
Power on the Landroid Vision.
2
Enter your PIN code.
3
Use the knob to navigate to the 'Working Time' icon and select it.
This will allow you to view and customize the work time.
4
Choose 'Customize work time'.
After selecting this, you can choose which day of the week you want the mower to Cut-to-Edge. If you want to set this feature for multiple days, you'll need to set it up for each day individually.
5
Select the day you want to enable the Cut-to-Edge feature.
6
Make sure 'Scheduler #1' is enabled.
If it's not, you can enable it by pushing the knob, turning it to the right, and then pushing the knob again to save the setting.
7
Activate the 'Border cut' feature.
Once 'Scheduler #1' is enabled, you'll see the 'Border cut' option. Activate it by switching it to ON.
Remember, each day needs to be set up individually if you want the Cut-to-Edge feature to run on multiple days.
On this page