Skip to Content
(WR220) LANDROID VISION 20V BOUNDARYLESS ROBOTIC LAWN MOWER (1/2 ACRE)Mower does not respond when pressing command in the APP
(WR220) LANDROID VISION 20V BOUNDARYLESS ROBOTIC LAWN MOWER (1/2 ACRE)
Mower does not respond when pressing command in the APP
Try this solution
Update Vision mower firmware
You can do this by connecting Vision on your phone App and Wi-Fi. Once you confirm there's a new software available, the update will happen automatically Over-the-Air (OTA).
You may also update it manually by following the Step-by-step Guide.
1
Using a USB stick, download the latest software version at our Worx Landroid Vision website.
Ensure the USB stick is formatted in FAT32.
Click here to download the latest version.
It is important that the Landroid Vision is charging, and the battery capacity has reached 50% prior to starting the firmware update.
2
Save the file and extract the content to your USB stick.
3
Make sure your Landroid Vision is charging on the base station.
4
Turn off the Landroid Vision.
5
Open the battery cover of the Landroid Vision to access the USB port.
6
Insert the USB stick into the port.
7
Turn on the Landroid Vision.
8
Without lifting the Landroid Vision, remove the USB stick when 'Please remove the USB key' is displayed.
9
The update will begin automatically and may take a while.
Landroid Vision will automatically restart after the update is completed.
On this page