Skip to Content
(WR208) LANDROID VISION 20V BOUNDARYLESS ROBOTIC LAWN MOWER (1/5 ACRE)Firmware cannot update via Over-the-Air (OTA)
(WR208) LANDROID VISION 20V BOUNDARYLESS ROBOTIC LAWN MOWER (1/5 ACRE)

(WR208) LANDROID VISION 20V BOUNDARYLESS ROBOTIC LAWN MOWER (1/5 ACRE)

Firmware cannot update via Over-the-Air (OTA)

Try this solution

Try updating the firmware manually with a USB stick.

Follow the Step-by-step guide on how to update the firmware manually.

1

Using a USB stick, download the latest software version at our Worx Landroid Vision website.

Ensure the USB stick is formatted in FAT32.

Click here to download the latest version.

It is important that the Landroid Vision is charging, and the battery capacity has reached 50% prior to starting the firmware update.

2

Save the file and extract the content to your USB stick.

3

Make sure your Landroid Vision is charging on the base station.

4

Turn off the Landroid Vision.

5

Open the battery cover of the Landroid Vision to access the USB port.

6

Insert the USB stick into the port.

7

Turn on the Landroid Vision.

8

Without lifting the Landroid Vision, remove the USB stick when 'Please remove the USB key' is displayed.

9

The update will begin automatically and may take a while.

Landroid Vision will automatically restart after the update is completed.

Need more help?

Ask a different question(WR208) LANDROID VISION 20V BOUNDARYLESS ROBOTIC LAWN MOWER (1/5 ACRE)
Select a different product
On this page