Your Landroid is inside its working area and the boundary wire is connected, but the display says ‘Outside working area! Press START to reset’ | (WR150) LANDROID L 20V 4.0AH ROBOTIC LAWN MOWER (1/2 ACRE)

Skip to Content

Your Landroid is inside its working area and the boundary wire is connected, but the display says ‘Outside working area! Press START to reset’

Try this solution

Reverse the boundary wire ends and reconnect to the charging station

Possible cause:
The boundary wire ends are clamped incorrectly.

Need more help?

Ask a different questionWorx Dynamic Help Center

Select a different product

On this page