Skip to Content
(WG896) 12 AMP ELECTRIC 7.5" LAWN EDGER/TRENCHERTool turns on, but is moving backwards instead of forward
(WG896) 12 AMP ELECTRIC 7.5" LAWN EDGER/TRENCHER

(WG896) 12 AMP ELECTRIC 7.5" LAWN EDGER/TRENCHER

Tool turns on, but is moving backwards instead of forward

Try this solution

Adjust the CUT DEPTH KNOB

Kickback occurs if the BLADE is too low or if it hits an obstruction such as thick, matted grass. Raise the tool and start by squeezing the ON/OFF SWITCH.

You may need to adjust the EDGE GUIDE KNOB if the issue persists.

Need more help?

Ask a different question(WG896) 12 AMP ELECTRIC 7.5" LAWN EDGER/TRENCHER
Select a different product
On this page