Skip to Content
(WG322) 20V POWER SHARE 10" CORDLESS CHAINSAW WITH AUTO-TENSIONChainsaw is not being oiled enough

(WG322) 20V POWER SHARE 10" CORDLESS CHAINSAW WITH AUTO-TENSION

Chainsaw is not being oiled enough

Try this solution

Refill oil

Possible cause:
No oil in reservoir.

1

WARNING: Remove the battery pack before filling the oil tank

2

Set chain saw on any suitable surface with Oil Filler Cap (3) facing upward

3

Clean area around the Oil Filler Cap with cloth and unscrew the cap by turning it counter clockwise

4

Add bar and chain oil until tank is full

DO NOT OVERFILL. Oil levels will be shown through the OIL LEVEL WINDOW (14). Avoid getting dirt or debris in the oil tank.

5

Refit Oil Filler Cap (3) and tighten it by turning it clockwise

Need more help?

Ask a different question(WG322) 20V POWER SHARE 10" CORDLESS CHAINSAW WITH AUTO-TENSION
Select a different product
On this page