Skip to Content
(WG320) 20V POWER SHARE JAWSAW CORDLESS CHAINSAWPoor cut quality

(WG320) 20V POWER SHARE JAWSAW CORDLESS CHAINSAW

Poor cut quality

Try this solution

Replace the chain/bar

Install the Lock Pin (12 in manual) and open the cover. Loosen and remove the Chain Tensioning Bolt (17). Lift the Guide Bar and Saw Chain out through the jaw, angling the Guide Bar to clear the two bar locating pins (d)

If replacing the Guide Bar, remove the
mounting plate (a), which is retained by a
single screw and fit to the new Guide Bar.
The Guide Bar is symmetrical and may be
mounted with either face outward (can be
reversed if the lower working edge is worn)

Click here for the chain or here for the bar.

Need more help?

Ask a different question(WG320) 20V POWER SHARE JAWSAW CORDLESS CHAINSAW
Select a different product
On this page