My tool sounds like it's running, but the chain is not moving | (WG309) 8 AMP ELECTRIC 10" POLE SAW

Skip to Content

(WG309) 8 AMP ELECTRIC 10" POLE SAWMy tool sounds like it's running, but the chain is not moving

My tool sounds like it's running, but the chain is not moving

Try this solution

Ensure the chain is fully seated in the DRIVE SPROCKET grooves

1

WARNING: Unplug the unit before attempting any fixes

2

Remove the CHAIN COVER (12) by turning the CHAIN TENSIONING KNOB (11) counterclockwise

3

Make sure that the chain is fully seated in the DRIVE SPROCKET grooves (15)

4

Cover the bar and chain and tighten down the CHAIN COVER

5

Press the LOCK-OUT BUTTON (1) while squeezing on the ON/OFF SWITCH (2)

Need more help?

Ask a different question(WG309) 8 AMP ELECTRIC 10" POLE SAW

Select a different product

On this page